References

1 Peckitt N.S. http://www.maxfac.com
2 Peckitt N.S Stereoscopic Lithography and the Manufacture of Customised Implants in Facial Reconstruction. Brånemark Reunion, Blackrock, Dublin, May 1997.
3 Peckitt N.S Stereoscopic Lithography and the Manufacture of Customised Implants in Facial Reconstruction. Poster Presentation: 5th International Congress on Oral Cancer, London, September 1997.
4 Peckitt N.S. Stereoscopic Lithography: Customised Implants in Orofacial Reconstruction. European Association of Cranio-maxillo-facial Surgeons, Helsinki, 1998
5 Peckitt N.S. Stereoscopic Lithography: customised titanium implants in orofacial reconstruction. A new surgical technique without flap cover. British Journal of Oral and Maxillofacial Surgery 1999; 37, 353-369.
6 Peckitt N.S. In: Rapid Prototyping Casebook Chapter: Rapid prototypes and customized implants in maxillofacial reconstruction. Pages 191-200 Publishers: Professional Engineering Publications 2001 ISBN 1 86058 076 9
7 American Joint Committee on Cancer. Manual For Staging Of Cancer Third Ed. 1988. Purposes and Principles 6 Staging: Chapter 1 pp 3-10. Editors: Beahrs O.H., Henson D.E., Hutter R.V.P., Myers M.H. Lippincott Company Philadelphia.
8 Stell P.M., McCormick M.S. Cancer of the Head and Neck. Are we doing any better? Lancet 1975; 11, 1127.
9 Raveh J., Stich I-I., Sutter F., Greiner R. Use of Titanium-coated Hollow Screw and Reconstruction Plate System in Bridging of Lower Jaw Defects. Journal of Oral and Maxillofacial Surgery 1984; 42, 281-294.
10 Raveh J., Roux M, Sutter F. The Lingual Application of a Reconstruction Plate: A New Method in Bridging Lower Jaw Defects. Journal of Oral and Maxillofacial Surgery 1985; 43, 735-739.
11 Raveh J., Sutter F., Hellem S. Surgical Procedures for Reconstruction of the Lower Jaw Using the Titanium-Coated Hollow-Screw Reconstruction Plate System: Bridging of Defects. The Otolaryngologic Clinics of North America 1987; 20, 535-558.
12 Raveh J, Vuillemin T., Ladrach K., Roux M., Sutter F. Plate Osteosynthesis of 367 Mandibular Fractures. The Unrestricted Indication for the Intraoral Approach. Journal Cranio-Maxillo-Facial Surgery 1987; 15, 344-253.
13 Hellem S., Olofsson J. Titanium-Coated Hollow Screw and Reconstruction Plate System (THORP) in Mandibular Reconstruction. Journal Cranio-Maxillo-Facial Surgery 1988; 16, 173-183.
14 Vuillemin T., Raveh J., Sutter F. Mandibular Reconstruction with the Titanium Hollow Screw Reconstruction Plate (THORP) System: Evaluation of 62 Cases. Plastic and Reconstructive Surgery 1988; 82, 804-814.
15 Vuillemin T., Raveh J., Sutter F. Mandibular Reconstruction with the THORP Condylar Prosthesis after Hemimandibulectomy. Journal Cranio-Maxillo-Facial Surgery 1989; 17, 78-87.
16 Raveh J. Lower Jaw Reconstruction with the THORP System for Bridging Lower Jaw Defects. Head and Neck Cancer 1990; 2, 344-349
17 Stoll P., Bahr W., Wacher R. Bridging of Mandibular Defects Using AO-Reconstruction Plates. THORP - VERSUS 3-DBRP-System. Presentation.- 10th Congress European Association of Journal Cranio-Maxillo-Facial Surgeons. Brussels September 1990.
18 Karran S. Who needs Nutritional Support? In: Surgical Review 3; 1982 pp 25-62 Edited by Lumley J.S.P. and Craven J.L,. Publishers: Pitman.
19 Farag I., McGurk M. A Prospective Study of Complications Encountered in the Surgical Treatment of Otoharyngeal andMaxillary CancerOral Diseases5th International Congress of Oral Cancer. Programme and Abstracts; 1997; 3, S24.
20 Husseiny M. Fata M. Free Fibula Skin Paddle. A way to Improve its Reliability? Oral Diseases 5th International Congress of Oral Cancer. Programme and Abstracts; 1997; 3, S8.
21 Webster K., Brown A.M.S. The Versatility of the Scapula Flap in Oral Reconstruction Oral Diseases 5th International Congress of Oral Cancer. Programme and Abstracts; 1997; 3, S8.
22 Herter N., Novelli J.L. Lateral Trapezius Myo and Osteomyocutaneous Flap on Head and Neck Reconstruction. Oral Diseases 5th International Congress of Oral Cancer. Programme and Abstracts; 199)7; 3, S62.
23 Azizyan R.I., Matyakin E.G., Uvarov A.A., Fedotenko S.P., Kropotov M.A. Podvyaznikov S.O. Plastic Correction of Extensive Defects of Head and Neck. Oral Diseases 5th International Congress of Oral Cancer. Programme and Abstracts; 1997; 3, S63.
24 Royal College of Surgeons of England & The British Orthopaedic Association. Better Care for the Severely Injured. July 2000
25 Hutchinson IL, Magennis O, Shepherd JP, et al. The BAOMS United Kingdom Survey of Facial Injuries Part 1: Aetiology and the association with alcohol consumption. British Journal of Oral and Maxillofacial 1998; 36:3-13.
26 Engelke K, et al. Sereolithographic models simulating trabecular bone and their characterization by thin-slice and micro-CT. Eur Radiol. 2001;11(10):2026-40.
27 Heckmann SM, et al. Overdenture attachment selection and the loading of implant and denture-bearing area. Part 2: A methodical study using five types of attachment. Clin Oral Implants Res. 2001 Dec;12(6):640-647.
28 Heckmann SM, et al. Overdenture attachment selection and the loading of implant and denture-bearing area. Part 1: In vivo verification of stereolithographic model. Clin Oral Implants Res. 2001 Dec;12(6):617-623.
29 Pentecost JO, et al. Graphical and stereolithographic models of the developing human heart lumen. Comput Med Imaging Graph. 2001 25(6):459-63.
30 Lermusiaux P, et al. Aortic aneurysm: construction of a life-size model by rapid prototyping. Ann Vasc Surg. 2001 Mar;15(2):131-5.
31 Stein R, et al. The Giessen-Mainz-Frankfurt procedure: a new method for complex pelvic reconstruction for bladder exstrophy. J Urol. 2001 165(4):1235-9.
32 Kato K, et al. Accuracy of plastic replica of aortic aneurysm using 3D-CT data for transluminal stent-grafting: experimental and clinical evaluation. J Comput Assist Tomogr. 2001 25(2):300-4.
33 Pessa JE. The potential role of stereolithography in the study of facial aging. Am J Orthod Dentofacial Orthop. 2001 Feb;119(2):117-20.
34 Djupesland PG, et al. Accuracy of acoustic rhinometry. Rhinology. 2001 Mar;39(1):23-7.
35 Huisinga-Fischer CE, et al. CT-based size and shape determination of the craniofacial skeleton: a new scoring system to assess bony deformities in hemifacial microsomia. J Craniofac Surg. 2001 Jan;12(1):87-94.
36 Undt G, et al. MRI-based stereolithographic models of the temporomandibular joint: technical innovation. J Craniomaxillofac Surg. 2000 Oct;28(5):258-63.
37 Morris CL, et al. Orofacial prosthesis design and fabrication using stereolithography. Aust Dent J. 2000 Dec;45(4):250-3.
38 Thoma W, et al. Custom-made knee endoprosthetics using subtraction data of 3-dimensional CT scans. A new approach Orthopade. 2000 Jul;29(7):641-4. German.
39 Gateno J, et al. An in vitro study of the accuracy of a new protocol for planning distraction osteogenesis of the mandible. J Oral Maxillofac Surg. 2000 Sep;58(9):985-90; discussion 990-1.
40 Pessa JE. An algorithm of facial aging: verification of Lambros's theory by three-dimensional stereolithography, with reference to the pathogenesis of midfacial aging, scleral show, and the lateral suborbital trough deformity. Plast Reconstr Surg. 2000 Aug;106(2):479-88; discussion 489-90.
41 Yourtee D, et al. Stereolithographic models of biopolymers. J Mol Graph Model. 2000 Feb;18(1):26-8, 59-60.
42 Graham JA, et al. The nasal air sampler: a device for sampling inhaled aeroallergens. Ann Allergy Asthma Immunol. 2000 Jun;84(6):599-604.
43 Dolz MS, et al. Stereolithography: a potential new tool in forensic medicine. Am J Forensic Med Pathol. 2000 Jun;21(2):119-23.
44 Park GC, et al. Correction of congenital microtia using stereolithography for surgical planning. Plast Reconstr Surg. 2000 Apr;105(4):1444-7.
45 Hagiwara Y, et al. Application of CT imaging for dental implant simulation. J Oral Sci. 1999 Dec;41(4):157-61.
46 Recheis W, et al. New methods and techniques in anthropology. Coll Antropol. 1999 Dec;23(2):495-509.
47 Recheis W, et al. Re-evaluation of the endocranial volume of the Guattari 1 Neandertal specimen (Monte Circeo). Coll Antropol. 1999 Dec;23(2):397-405.
48 Binder TM, et al. Stereolithographic biomodeling to create tangible hard copies of cardiac structures from echocardiographic data: in vitro and in vivo validation. J Am Coll Cardiol. 2000 Jan;35(1):230-7.
49 Staudenmaier R, et al. Ear reconstruction supported by a stereolithographic model. Plast Reconstr Surg. 2000 Aug;106(2):511-2.
50 Reuther J. Orthognathic surgery: corrective bone operations. Mund Kiefer Gesichtschir. 2000 May;4 Suppl 1:S237-48. German.
51 Bettega G. On the article "Orthognathic surgery and stereolithographic models: a new technic of dental occlusion transfer" Rev Stomatol Chir Maxillofac. 2000 Apr;101(2):72-3. French.
52 Taha F, et al. Orthognathic surgery and stereolithographic models. A new technic of dental occlusion transfer. Rev Stomatol Chir Maxillofac. 2000 Apr;101(2):65-71. French.
53 Smet MH, et al. Three-dimensional imaging of acetabular dysplasia: diagnostic value and impact on surgical type classification. Eur J Radiol. 2000 Apr;34(1):26-31.
54 Marmulla R, et al. Surgical planning of computer-assisted repositioning osteotomies. Plast Reconstr Surg. 1999 Sep;104(4):938-44.
55 Whitman DH, et al. Model surgery prediction for mandibular midline distraction osteogenesis. Int J Oral Maxillofac Surg. 1999 Dec;28(6):421-3.
56 Chassagne JF, et al Rapid prototyping and bone reconstruction. Ann Chir Plast Esthet. 1999 Oct;44(5):515-24. French.
57 Gross GJ, et al. Bone architecture and image synthesis. Morphologie. 1999 Jun;83(261):21-4.
58 Djupesland PG, et al. Acoustic rhinometry: a study of transient and continuous noise techniques with nasal models. Am J Rhinol. 1999 Jul-Aug;13(4):323-9.
59 Dean D, et al. Osseointegration of preformed polymethylmethacrylate craniofacial prostheses coated with bone marrow-impregnated poly (DL-lactic-co-glycolic acid) foam. Plast Reconstr Surg. 1999 Sep;104(3):705-12.
60 Erickson DM, et al. An opinion survey of reported benefits from the use of stereolithographic models. J Oral Maxillofac Surg. 1999 Sep;57(9):1040-3.
61 Holck DE, et al. Benefits of stereolithography in orbital reconstruction. Ophthalmology. 1999 Jun;106(6):1214-8.
62 Fallahi B, et al. Computer-aided manufacturing of implants for the repair of large cranial defects: an improvement of the stereolithography technique. Neurol Res. 1999 Apr;21(3):281-6.
63 Ponce de Leon MS, et al. New evidence from Le Moustier 1: computer-assisted reconstruction and morphometry of the skull. Anat Rec. 1999 Apr 1;254(4):474-89.
64 Coward TJ, et al. Fabrication of a wax ear by rapid-process modeling using stereolithography. Int J Prosthodont. 1999 Jan-Feb;12(1):20-7.
65 Kermer C, et al. Colour stereolithography for planning complex maxillofacial tumour surgery. J Craniomaxillofac Surg. 1998 Dec;26(6):360-2.
66 Abe M, et al. Model-based surgical planning and simulation of cranial base surgery. Neurol Med Chir (Tokyo). 1998 Nov;38(11):746-50; discussion 750-1.
67 Amet EM. Computerized tomography with CT models for contemporary ramus frame implant planning and construction. J Oral Implantol. 1998;24(3):152-8.
68 Marmulla R, et al. A new computer-aided surgical approach for reconstruction of the orbit. Klin Monatsbl Augenheilkd. 1998 Nov;213(5):301-5. German.
69 Foroutan M, et al. Stereolithography: application to neurosurgery. Critical Reviews in Neurosurgery. 1998 Jul 20;8(4):203-8.
70 McAllister ML. Application of stereolithography to subperiosteal implant manufacture. J Oral Implantol. 1998;24(2):89-92.
71 Sailer HF, et al. The value of stereolithographic models for preoperative diagnosis of craniofacial deformities and planning of surgical corrections. Int J Oral Maxillofac Surg. 1998 Oct;27(5):327-33.
72 Gaggl A, et al. Treatment planning for sinus lift augmentations through use of 3-dimensional milled models derived from computed tomography scans: a report of 3 cases. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 1998 Oct;86(4):388-92.
73 Arnaud E, et al. Aplasia of the skull without scalp anomalies. A case report. Ann Chir Plast Esthet. 1998 Jun;43(3):275-81. French.
74 Sato K, et al. Use of selectively colored stereolithography for diagnosis of impacted supernumerary teeth for a patient with cleidocranial dysplasia. Int J Adult Orthodon Orthognath Surg. 1998;13(2):163-7.
75 Abramov SS, et al. The possibility of using a laser stereolithography method in forensic medicine. Sud Med Ekspert. 1998 May-Jun;41(3):13-7. Russian.
76 Kermer C, et al. Preoperative stereolithographic model planning for primary reconstruction in craniomaxillofacial trauma surgery. J Craniomaxillofac Surg. 1998 Jun;26(3):136-9.
77 Begall K, et al. Artificial petrous bone produced by stereolithography for microsurgical dissecting exercises. ORL J Otorhinolaryngol Relat Spec. 1998 Sep-Oct;60(5):241-5.
78 Schultes G, et al. Changes in the dimensions of milled mandibular models after mandibular sagittal split osteotomies. Br J Oral Maxillofac Surg. 1998 Jun;36(3):196-201.
79 Schultes G, et al. Results of measurement of pre- and postoperative milling models of orthodontic-surgical treatment of dysgnathia patients. Mund Kiefer Gesichtschir. 1998 May;2 Suppl 1:S139-44. German.
80 Hoffmann J, et al. Using individually designed ceramic implants for secondary econstruction of the bony orbit. Mund Kiefer Gesichtschir. 1998 May;2 Suppl 1:S98-101. German.
81 Haers PE, et al. Preoperative diagnosis of complex craniofacial syndromes. Mund Kiefer Gesichtschir. 1998 May;2 Suppl 1:S13-5. German.
82 Vorwerk U, et al. Practice surgery on the artificial temporal bone. Development of temporal bone facsimiles with stereolithography. HNO. 1998 Mar;46(3):246-51. German.
83 Santler G, et al. Stereolithography models vs. milled 3D models. Production, indications, accuracy. Mund Kiefer Gesichtschir. 1998 Mar;2(2):91-5. German.
84 James WJ, et al. Correction of congenital malar hypoplasia using stereolithography for presurgical planning. J Oral Maxillofac Surg. 1998 Apr;56(4):512-7.
85 Maclellan-Tobert SG, et al. Three-Dimensional Imaging Used for Virtual Dissection, Image Banking and Physical Replication of Anatomy and Physiology. Echocardiography. 1998 Jan;15(1):89-98.
86 Arnaud E, et al. Aplasia of the vertex without scalp defect. J Craniofac Surg. 1997 Mar;8(2):146-50.
87 Santler G, et al. Stereolithography versus milled three-dimensional models: comparison of production method, indication, and accuracy. Comput Aided Surg. 1998;3(5):248-56.
88 Hibi H, et al. Three-dimensional model simulation in orthognathic surgery. Int J Adult Orthodon Orthognath Surg. 1997;12(3):226-32.
89 Langton CM, et al. Development of a cancellous bone structural model by stereolithography for ultrasound characterisation of the calcaneus. Med Eng Phys. 1997 Oct;19(7):599-604.
90 Sader R, et al. Precision of 3D-assisted surgical planning with rapid prototype techniques. Mund Kiefer Gesichtschir. 1997 May;1 Suppl 1:S61-4. German.
91 Bouyssie JF, et al. Stereolithographic models derived from x-ray computed tomography. Reproduction accuracy. Surg Radiol Anat. 1997;19(3):193-9.
92 Lopponen H, et al. Computed tomography data based rapid prototyping model of the temporal bone before cochlear implant surgery. Acta Otolaryngol Suppl (Stockh). 1997;529:47-9.
93 Migaud H, et al. Value of a synthetic osseous model obtained by stereo-lithography for preoperative planning. Correction of a complex femoral deformity caused by fibrous dysplasia. Rev Chir Orthop Reparatrice Appar Mot. 1997;83(2):156-9. French.
94 Berry E, et al. Preliminary experience with medical applications of rapid prototyping by selective laser sintering. Med Eng Phys. 1997 Jan;19(1):90-6.
95 Englmeier KH, et al. Hybrid rendering of multidimensional image data. Methods Inf Med. 1997 Jan;36(1):1-10.
96 Kacl GM, et al. Rapid prototyping (stereolithography) in the management of intra-articular calcaneal fractures. Eur Radiol. 1997;7(2):187-91.
97 Kubler N, et al. Repair of human skull defects using osteoinductive bone alloimplants. J Craniomaxillofac Surg. 1995 Dec;23(6):337-46.
98 Grolman W, et al. Three-dimensional models of the tracheostoma using stereolithography. ORL J Otorhinolaryngol Relat Spec. 1995 Nov-Dec;57(6):338-42.
99 Korves B, et al. Image- and model-based surgical planning in otolaryngology. J Otolaryngol. 1995 Oct;24(5):265-70.
100 Nakajima T, et al. Integrated life-sized solid model of bone and soft tissue: application for cleft lip and palate infants. Plast Reconstr Surg. 1995 Oct;96(5):1020-5.
101 Lindner A, et al. Indications and use of stereolithographic skull reconstructions in oromaxillofacial surgery. Radiologe. 1995 Sep;35(9):578-82. German.
102 Sciarappa PB, et al. Stereolithography and the Iceman. Radiol Technol. 1995 Sep-Oct;67(1):73-7.
103 Schmitt SM, et al. Fabrication of titanium implant-retained restorations with nontraditional machining techniques. Int J Prosthodont. 1995 Jul-Aug;8(4):332-6.
104 Hjalgrim H, et al. Stereolithography: potential applications in anthropological studies. Am J Phys Anthropol. 1995 Jul;97(3):329-33.
105 Yau YY, et al. Technical note: maxillofacial biomodelling--preliminary result. Br J Radiol. 1995 May;68(809):519-23.
106 Skawinski WJ, et al. The application of stereolithography to the fabrication of accurate molecular models. J Mol Graph. 1995 Apr;13(2):126-35.
107 Mole C, et al. A new three-dimensional treatment algorithm for complex surfaces: applications in surgery. J Oral Maxillofac Surg. 1995 Feb;53(2):158-62.
108 Bill JS, et al. Stereolithography in oral and maxillofacial operation planning. Int J Oral Maxillofac Surg. 1995 Feb;24(1 Pt 2):98-103. English; German.
109 zur Nedden D, et al. Skull of a 5,300-year-old mummy: reproduction and investigation with CT-guided stereolithography. Radiology. 1994 Oct;193(1):269-72.
110 Andrews JC, et al. Stereolithographic model construction from CT for assessment and surgical planning in congenital aural atresia. Am J Otol. 1994 May;15(3):335-9.
111 Barker TM, et al. Accuracy of stereolithographic models of human anatomy. Australas Radiol. 1994 May;38(2):106-11.
112 Anderl H, et al. CT-guided stereolithography as a new tool in craniofacial surgery. Br J Plast Surg. 1994 Jan;47(1):60-4.
113 Wolf HP, et al. Technique and applications of stereolithographic cranial models. Fortschr Kiefer Gesichtschir. 1994;39:19-22. German.
114 Dittmann W, et al. Stereolithography as a new method of reconstructive surgical planning in complex osseous defects of the cranial base. Technical note. Zentralbl Neurochir. 1994;55(4):209-11. German.
115 Klimek L, et al. Stereolithographic modelling for reconstructive head surgery. Acta Otorhinolaryngol Belg. 1993;47(3):329-34.
116 Klimek L, et al. Methods for simulation of surgical interventions in head and neck surgery. HNO. 1992 Nov;40(11):446-52. Review. German.
117 Klein HM, et al. Stereolithographic model construction based on 3-dimensional reconstructed CT sectional image sequences. Rofo Fortschr Geb Rontgenstr Neuen Bildgeb Verfahr. 1992 May;156(5):429-32. German.
118 Klein HM, et al. Pediatric craniofacial surgery: comparison of milling and stereolithography for 3D model manufacturing. Pediatr Radiol. 1992;22(6):458-60.
119 Vannier MW. Computer applications in radiology. Curr Opin Radiol. 1991 Apr;3(2):258-66.
120 Mankovich NJ, et al. The display of three-dimensional anatomy with stereolithographic models. J Digit Imaging. 1990 Aug;3(3):200-3.
121 Alberti C. Three-dimensional CT and structure models. Br J Radiology 1979;53:261-262.
122 Barker T.M., et al. Integration of 3-D Medical Imaging and Rapid Prototyping to Create Stereolithographic Models. Aust. Phys. Eng. Sci. (1993) 16:2 79-85
123 D'Urso P.S., Tomlinson F.H., et al. stereolithographic (SLA) Biomodelling in Cranioplastic Implant Surgery. Proc of the International Conference on Recent Advances in Neurotraumatology. Gold Coast, Australia. (1994) September 25-28. Pages 153-6.
124 Arvier J.F., Barker T.M., et al. Maxillofacial Biomodelling. British Journal of Oral and Maxillofacial Surgery. (1994) 32: 276-83.
125 Lightman A.J., Vanassche B., et al. Applications of Rapid Prototyping to Surgical Planning- A Survey of Global Activities. Proc of the 6th International Conference on Rapid Prototyping. (1995) June 4-7, Dayton. Ohio, U.S.A. Pages 16-21.
126 Finkle E. Surgery moves into the third dimension. Lancet 348 Dec 21/28 (1996) Page 1726.
127 D’URSO P.S. Rapid Prototyping Technology: a unique approach to the diagnosis and planning of medical procedures. Case Studies 3.3.5-3.3.7 (Pages 78-86). Society of Manufacturing Engineers. Dearborn, Michigan, U.S.A. (1997).
128 D’Urso P.S., Thompson R.G. Fetal biomodelling. Aust NZ J Obstet Gynaecol. (1998) 38:205-7.
129 D’Urso P.S., Atkinson R.L., et al. Stereolithographic (SL) biomodelling in craniofacial surgery. The British Journal of Plastic Surgery. (1998) 51:7 522-530.
130 D’Urso P.S. Atkinson R.L., et al. Biomodelling of skull base tumours. The Journal of Clinical Neuroscience. (1999) 6(1), 31-35.
131 D’Urso P.S., Askin G., et al.Spinal Biomodelling. Spine. (1999) 24(12): 1247-1251.
132 D’Urso P.S., Barker T.M., et al.Stereolithographic (SL) biomodelling in cranio-maxillofacial surgery: a prospective trial. The Journal of Cranio-maxillofacial Surgery. (1999) 27:30-37.
133 Poulsen M., Lindsay C.,et al.Stereolithographic modelling as an aid to orbital brachytherapy. The International Journal of Radiation Oncology, Biology and Physics. (1999) 44(3):731-735.
134 D’Urso P.S., Hall B.I., et al. Biomodel guided stereotaxy. Neurosurgery. (1999) 44(5):1084-1093
135 D’Urso P.S., Thompson R.G., et al. Cerebrovascular biomodelling. Surgical Neurology. (1999) 52(5): 490-500.
136 D'Urso P.S., Earwaker W.J., et al. Custom cranioplasty using stereolithography and acrylic. British Journal of Plastic Surgery (2000) 53(3):200-04.
137 D'Urso P.S., Thompson R.G., et al. Stereolithographic (SL) Biomodelling in Paleontology: A Technical Note. Rapid Prototyping Journal. (2000) 6(3):212-215.
138 Nowak R. Short Cut - Separating Conjoined Twins could be made safer and quicker. New Scientist 2264 Nov 11 (2000) Page 6.
139 D'Urso P.S., Redmond M.J. A method for the resection of cranial tumours and skull reconstruction. British Journal of Neurosurgery (2000) 14(6): 555-559.
140 D’Urso P.S., Barker T.M., et al. Stereolithographic (SL) biomodelling in cranio-maxillofacial surgery: a prospective trial. In: Yearbook of Otolaryngology – Head & Neck Surgery 2000. Mosby Year Book Inc. St Louis, Missouri, USA. (In press).
141 Pham D.T., Dimov S.S. In: Rapid Manufacturing - The technologies and applications of rapid prototyping and rapid tooling. (Pages 100-101) Springer-Verlag. London, UK. 1st Edition, 2001.
142 Swaelens B., Kruth J.P. Medical Applications of rapid prototyping techniques. Proceedings of the Forth International Conference on RP, Dayton Ohio 14-17 June 1993 pp 107-120.
143 Rapid Prototyping Association RP Technology: a unique approach to the diagnosis and planning of medical procedures, pp 15-17 Rapid Prototyping Association of the Society of Manufacturing Engineers 1997
144 Phidias Project Summary Report Materialise NV, Siemens Medical, Katholieke Universiteit Leuven and Zeneca Specialties 1996
145 Wouters K Chapter: Medical models, the ultimate representations of a patient-specific anatomy In: Rapid Prototyping Casebook 2001 pp177- 181 Publishers: Professional Engineering Publications 2001 ISBN 1 86058 076 9
146 Walsh K., Boyle D., Stryker/Howmedical; Osteonics, Limerick Ireland Chapter: Rapid prototyping in the Biomedical industry In: Rapid Prototyping Casebook 2001 pp 183-190 Publishers: Professional Engineering Publications 2001 ISBN 1 86058 076 9
147 Dickens P. Chapter: Rapid manufacturing In: Rapid Prototyping Casebook 2001 pp239- 242 Publishers: Professional Engineering Publications 2001 ISBN 1 86058 076 9
148 O'Neill W. Chapter: The rapid production of microstructures In: Rapid Prototyping Casebook 200; pp243-247 Publishers: Professional Engineering Publications 2001 ISBN 1 86058 076 9
149 Ikuta K. Hirowatari K. Real three dimensional micro fabrication using stereolithography and metal moulding. Proc. IEEE MEMS 1993; 42-47 Fort Lauderdale
150 Friedrich C.R., Vasile M.J. Development of the micromilling process for high aspect ration micostructures J. Microelectronic Systems 1996; 5, 33-38
151 Chang J.J. et al. Precision micromachining with green lasers. J. Laser App. 1998 10 (8), 285-290
152 Madden J.D. Hunter I.W. Three dimensional microfabrication by localised electrode position. J. Microelectromech. Syst. 1996; 5, 24-32
153 Beluze L., Bertsch A. Renaud P. Microstereolithography: a new process to build complex 3D objects. Symposium on Design Test and microfabbrication of MEMs/MOEMs Proc. SPIE 1999; 3680 (2) p808.
154 Boyd RL. Enhancing the value of orthodontic treatment: Incorporating effective preventive dentistry into treatment. Am J Orthod and Dentofacial Orthop 2000; 117(5):601-603
155 Boyd RL, Hochman M, Vanarsdall Jr. RL. New Technologies in Adult Orthodontics. Compendium 2001; 22(2):110-117
156 Boyd RL, Miller RJ, Vlaskalic, V. The Invisalign System in Adult Orthodontics: Mild Crowding and Space Closure Cases. J of Clin Orthod 2000; 34(4):203-212
157 Boyd RL, Miller RJ, Vlaskalic, V. The Invisalign System in Adult Orthodontics: Mild Crowding and Space Closure Cases. Dental Asia 2000; 1:12-19
158 Boyd RL, Vlaskalic V. Three-dimensional diagnosis and orthodontic treatment of complex malocclusions with the Invisalign? Appliance. Semin Orthod 2001; 7(4): 274-293
159 Derakhshan M, Miller RJ. The Invisalign System. The Newsletter of the American Society of Laser in Dentistry & Advanced Technologies. Fall 2001; Vol. 12, pg. 6
160 McNamara Jr. JA, Brudon WL. Invisible Retainers and Aligners. In: McNamara Jr JA, Brudon WL, editors. Orthodontics and Dentofacial Orthopedics. Ann Arbor: Needham; 2001. p.475-486
161 Miethke RR (Editor) et al. Kieferorthopadie: Sonderheft Invisalign: 2001; 15:3-58
162 Miller RJ. Using the Invisalign System™. The Orthodontic Cyberjournal 2001;www.oc-j.com/june01/Invisalign.htm
163 Owen III AH. Accelerated Invisalign Treatment. J of Clin Orthod 2001;35(6):381-384
164 Schlossberg M. GPs: Give us Invisalign. AGD Impact 2001; 29(8):15-17
165 Sheridan JJ. The Reader's Corner. J of Clin Orthod 2001; 35(4):267-271
166 Tuncay, OC (Editor). Cases & Commentaries in Orthodontic Technology 2001: Invisalign Treatment of Occlusal Problems in an Adult by Dr. Norris and Mid-treatment Conversion from Conventional to Invisalign Technology by Dr. Greeley. (IN PRESS)
167 Vlaskalic V, Boyd RL. Orthodontic treatment of a mildly crowded malocclusion using the Invisalign System. Aust Orthod J 2001; 17(1):41-46